Packard Bell PB88
chipChipset
cpuCPU socket
speedFSB speed
8MHz
moboForm factor
OEM / Proprietary
dimDimensions
260mm x 186mm
chipCache
None/Integrated in the CPU
ramMax RAM size
256KB(option1)640KB(option2)
ramRAM type
Empty
pwrPSU connector
connI/O ports
1x 
Floppy interface
1x 
Parallel
1x 
Serial
1x 
XT Keyboard
cardExpansion slots
7x 
8-bit ISA

Also known as:

  • Vendex Headstart Turbo-888 XT
  • Samsung unknown

Known issues:

  • Leaky Ni-Cd clock battery

The Ni-Cd battery may be leaking, risking damage to PCB layers & nearby components. Promptly remove the battery & clean corrosion/alkaline salts from the board. Use white vinegar to dissolve salts, but exercise caution as vinegar can corrode exposed metals. A thorough examination & repair may be needed. Replace battery with guide: https://github.com/wiretap-retro/Not-A-Varta

  • DALLAS RTC coin cell empty

The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.

Notes:

RAM cannot be upgraded

Last updated 2024-01-25T13:51:21Z
Board info score is 8/10
1 file available

Vendor: Phoenix [1 entry]

POST string
Note
Core Ver.
BIOS Ver.
Logs
POST string
Note
latest (09/03/87)
Core version
2.03SF
BIOS version
Logs
drv No drivers available
doc 3 board documents available
Release date
File
Logs
Release date
File
Logs
Release date
File
Logs
Release date
File
Logs

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.