Known issues:
- Leaky Ni-Cd clock battery
The Ni-Cd battery may be leaking, risking damage to PCB layers & nearby components. Promptly remove the battery & clean corrosion/alkaline salts from the board. Use white vinegar to dissolve salts, but exercise caution as vinegar can corrode exposed metals. A thorough examination & repair may be needed. Replace battery with guide: https://github.com/wiretap-retro/Not-A-Varta
Notes:
The pictured motherboard was reworked to accept CR2032 coin cell batteries. The second diode from the left in the block of vertical through-hole components below the battery socket needs to be disconnected to prevent charging current from being applied.
Vendor: AMI [1 entry]
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.