ETOP ISA-E13
chipChipset
cpuCPU socket
Empty
speedFSB speed
166MHz
moboForm factor
Single Board Computer
dimDimensions
185mm x 127mm
chipCache
None/Integrated in the CPU
ramMax RAM size
128MB(onboard)
ramRAM type
200-pin DDR2 SO-DIMM
pwrPSU connector
Molex (4-pin)
connI/O ports
1x 
CF Card Slot
1x 
Floppy interface
2x 
IDE interface
1x 
PS/2 keyboard
1x 
PS/2 mouse
1x 
Parallel
1x 
RJ-45 LAN
4x 
Serial
8x 
USB 2.0
1x 
VGA
cardExpansion slots
1x 
16-bit ISA
1x 
PC/104+ (PC/104-Plus)

Known issues:

  • DALLAS RTC coin cell empty

The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.

Last updated 2024-03-20T20:53:02Z
Board info score is 6.8/10
chipsetChipset
chipChipset parts
DM&P Vortex86SX
chipVideo chips
XGI XG20 (Volari Z9)
ramMax VRAM size
64MB
cpuCPU family support
Empty
0 files available

Vendor: Award [1 entry]

POST string
Note
Core Ver.
BIOS Ver.
Logs
POST string
Note
Core version
BIOS version
Logs
drv No drivers available
doc 1 board document available
Release date
File
Logs
Release date
File
Logs
Chip
Release date
File
Logs
Chip
Release date
File
Logs

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.