Known issues:
- DALLAS RTC coin cell empty
The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.
Notes:
This board exists also without the voltage regulator and without the PS/2 mouse port. Look closely on your model for the regulator on the top right of the board and the PS/2 header next to the keyboard connector.
Vendor: Award [4 entries]
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.