InterTan DT-88
chipChipset
cpuCPU socket
DIP40
speedFSB speeds
4.77MHz10MHz
moboForm factor
LPX (max 229 x 330 mm)
dimDimensions
325mm x 308mm
chipCache
None/Integrated in the CPU
ramMax RAM size
1MB
ramRAM type
Empty
pwrPSU connector
AT (P8-P9)
connI/O ports
1x 
Floppy interface
1x 
IDE interface
1x 
PS/2 mouse
1x 
Parallel
2x 
Serial
1x 
VGA
1x 
XT Keyboard
cardExpansion slots
Empty

Known issues:

  • DALLAS RTC coin cell empty

The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.

Notes:

IDE is for XT-IDE (aka XTA), not standard IDE (aka ATA).

Last updated 2022-08-04T21:29:55Z
Board info score is 6.4/10
chipsetChipset
chipChipset parts
ALi M1101
chipVideo chips
Chips & Technologies F82C451 (Integrated VGA Graphics Controller)
ramMax VRAM size
256KB
cpuCPU family support
1 file available

Vendor: AMI [1 entry]

POST string
Note
Core Ver.
BIOS Ver.
Logs
POST string
Note
The CMOS setup is unreachable for some reason and the BIOS asks for "setinit.exe" to be configured. CMOS setup can be accessed using DOS' debug and entering "g=f000:a100"
Core version
060190
BIOS version
Logs
drv 1 driver available
Name
Version
OS support
Size
Filename
Name
Version
Empty
OS support
MS-DOS OS/2 1.x Windows 2.x
Size
505.9KB
Filename
doc No board documents available
Chip
Release date
File
Logs
Chip
Release date
File
Logs

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.