Micronics M54Pe (09-00210-xx)
Socket 5 (PGA320)
Pentium (P54)
60MHz66MHz
256KB
72-pin FPM
512MB
AT-Style (P8-P9)
AT (max 305 x 330mm)
355mm x 305mm
1x
Floppy interface
2x
IDE interface
1x
Parallel
2x
Serial
1x
AT Keyboard
3x
32-bit PCI
6x
32-bit EISA
Known issues:
- DALLAS RTC may be flat.
The RTC chip contains a battery which is probably empty by now. This battery holds the CMOS settings. If your board doesn't save the CMOS settings, replace the RTC chip with an equivalent, or mod the existing chip. Replacements can be made following this https://github.com/necroware/nwX287 or this https://github.com/necroware/nw12887 depending on the actual chip used.
Notes
Due to use of DIP-28 sockets for SRAM, board is limited to just 256K of L2 using 32Kx8bit SRAM . The larger 64Kx8 SRAM chips required for 512K of L2 are only available in DIP-32 form.
Last updated 2023-02-12T19:42:41Z
Intel 82433NX (LBX)
Intel 82434NX (PCMC)
Intel 82374SB (ESC)
Intel 82375SB (PCEB)
-
MTL Jumper manual (English)
-
Micronics M54Pe Manual (English)
-
TH99 Generated jumper manual (English)
Multi CPU support: yes (2 CPUs)
Model
Speed
FSB
Voltages
L1 Cache
L2 Cache
L3 Cache
Core
Process
TDP
Intel Pentium 100
100MHz
66MHz
3.3V
16KB
-
-
P54C
600nm
-
Intel Pentium 90
90MHz
60MHz
3.3V
16KB
-
-
P54C
600nm
-
No NPUs listed.
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.